Why Temperature Tracking Is Key In Asphalt Paving

Why Temperature Tracking Is Key In Asphalt Paving

For a smooth finish and the proper construction of any pavement, its different components need to be at the right temperature and texture. Asphalt pavement, constructed using asphalt mix, requires extra consideration during its production, including air temperature and base temperature, to ensure an ideal final product for paving.

In today’s blog post, we will provide you with the top five reasons why temperature tracking is vital for a pavement’s quality construction.

1. The Relationship Between Temperature and Texture

Any finished construction requires just the right level of temperature and texture of the asphalt mixture. A high temperature leads to a drippy and wet consistency mixture, while a low temperature leads to stiffness in the combination.

The standard temperature for a hot asphalt mix ranges from 250 degrees and up. Keep in mind, the mixture transportation from the plant to the job site will also decrease the temperature! Thus, pavement contractors should consider this point for efficient paving results.

2. Environmental Conditions

The environmental conditions of where the pavement is getting constructed are also essential to keep in mind. If the local weather of is too cold, it will allow the mixture to cool quickly, disturbing the asphalt mixture’s consistency.

Similarly, if the weather conditions are too humid and dry, it will provide the mixture a much higher temperature than the one ideal for paving.

3. Wind Velocity

The velocity of the wind plays a vital role in the effective paving and compaction of pavement. The higher the wind rate, the quicker the asphalt mixture will thin out, leading to a rough and unlevelled pavement.

4. Ground Temperature

While air temperature and weather changes should be monitored before paving, it is also necessary to monitor the base temperature with an infrared thermometer to ensure it is at least 50 degrees or above.

5. Width of The Pavement

The temperature of the asphalt mixture should also be monitored depending on the pavement’s width. Asphalt mixture poured in a thin pavement will cool down quicker as compared to a heavily poured pavement.

In both situations, base temperature and air velocity should be kept in mind, or the pavement will cool quicker than expected and unravel. If you need to hire an expert to construct a smooth pavement for you in Arnprior, ON, get in touch with J. Wilson Paving. Our team of professionals is very experienced in both residential paving or commercial paving projects. Get a free quote today!